您好，Dongguan Ruiqingxuan Plastic Mould Products Co., Ltd.网站欢迎您！
Today, the editor of Ruiqingxuan will introduce to youInjection moldingMouldFinished product processingThe basic structure. First of all, our injection mold is divided into two parts: movable mold and fixed mold. As the name suggests, the fixed mold is installed on the fixed seat of the injection molding machine, while the movable mold is installed on the movable seat. When we are doing injection molding, we need a movable mold, the two parts of the fixed mold are closed, and the plastic enters the mold cavity through the injection molding machine nozzle. After waiting for the completion of injection molding, the separation of the movable mold and the fixed mold is completed. Then the ejection mechanism moves to launch the product.
When the injection molding machine makes a product, the following steps are required:
1. Forming part: It is composed of the mold cavity that forms the shape of the plastic part. It is composed of a movable mold and a fixed mold. The related parts are usually composed of a convex mold, a concave mold, a core, an insert, etc.
2. Pouring system: The pouring system refers to the part of the runner before the plastic enters the cavity from the nozzle, including the main runner, cold material cavity, runner and gate, etc.
3. Guiding mechanism: to ensure the correct guidance and positioning between the moving and fixed molds, usually in the moving, the fixed mold part adopts guide posts, guide sleeves or in motion, and the fixed mold part is provided with inner and outer cone guides that match each other.
Well, that's the end of today's introduction! I hope this little knowledge can help you. If you are interested, follow this website and we will update more information from time to time.
Injection molding finished product processing
4 15, 2021
4 15, 2021