Plastic finished product processingWhat to pay attention to when operating

1. Production process adjustment:

1. First, check whether the process parameters are the same as the actual model, materials, and molds;

2. When the process parameters are input at the same time, the first beer starts to produce at a slightly reduced pressure speed, and then gradually adjust (according to the product quality ratio);

3. When there are no process parameters, it is necessary to understand the mold structure and adjust the amount of glue. It is strictly forbidden to adjust blindly, pay attention to the special molds that are not glued enough to stick to the molds, and the glue will be glued in the multi-layer position;

2. Operator production:

1. Check whether the machine safety adjustment is safe;

2. Whether the operator is familiar with the quality standards of the production products before operation;

3. The plastic injection molding processing plant explained that the processing method should be correct, such as: the nozzle must be cut or flattened, and other edges must not be injured or cut;

4. When inspecting the appearance, pay attention to shrinkage, color mixing, top height, lack of glue, material flowers, etc., and be clear about the limit of the receiving degree;

5. Products with strict appearance requirements, such as mirrors, light buttons, glossy surfaces, etc., which are assembled on the outside without spraying oil, must not have fingerprint oil spots. The workbench should be kept clean, and the product should not be scratched or abraded;

6. During production, the products shall be inspected every 30 minutes, and the samples and quality inspection packaging instructions shall be carefully checked to ensure that the qualified rate of the produced products reaches 100%;

7. At the same time, pay attention to whether the nozzle of the machine is leaking, whether the hopper needs to be filled, whether there is a problem with the mold, and whether the production task is completed every hour;

8. An overview of the plastic injection processing factory. When a box is completed, carefully check the quantity, fill in the label paper correctly, pay attention to whether it is incorrectly pasted, and place the goods in the specified area and arrange them neatly.

Today, Ruiqingxuan shared with you what knowledge you need to pay attention to when processing plastic products. Do you all understand? Pay attention to Ruiqingxuan, we will share mold knowledge with you from time to time.